1、自上料搅拌车卸料前让搅拌罐全速运转一两分钟。让混凝土充分搅拌,必要时可以加一些水,让混凝土搅拌得更均匀,也方便卸料。
1. Allow the mixing tank to run at full speed for one or two minutes before discharging from the charging mixer truck. The concrete shall be fully mixed. If necessary, some water can be added to make the concrete more uniform and convenient for unloading.
2、自上料搅拌车搅拌罐一定要仔细地冲洗干净。洗罐子时要仔细的冲洗干净,并把水反复的正反转两次,再放出来,一趟时把水箱的水全部放进罐子,再回到站加水清洗罐子。
2. The mixing tank of the feeding mixer truck must be carefully washed. When washing the tank, wash it carefully, and turn the water forward and backward twice, and then release it. In one trip, put all the water in the tank into the tank, and then return to the station to add water to clean the tank.
3、卸料不要大意和放料工打好关系。放料时自己看着,免得放料工乱操作放料操作杆,每次自上料搅拌车罐子正反转中间位子时停一下,保护减速机,托轮等。与放料工打好关系,卸料时也不要睡的太熟,万一工人闹情绪,把你自上料搅拌车放到工地不转罐子,造成闷罐就麻烦了。
3. Don't be careless when unloading materials. When discharging, watch yourself to prevent the discharger from operating the discharging lever randomly. Stop every time when the tank of the feeding mixer rotates forward and backward in the middle to protect the reducer, supporting wheel, etc. Keep a good relationship with the discharging workers, and don't sleep too well when discharging materials. In case the workers get upset and put your self feeding mixer on the construction site without turning the cans, it will be troublesome if the cans become stuffy.
4、放料前先把出料斗溜槽打湿。放料时把车尽量停在平地上放料前先把出料斗溜槽打湿,方便清洗。
4. Wet the chute of the discharge hopper before discharging. When discharging, park the truck on the flat ground as much as possible and wet the chute of the discharge hopper before discharging to facilitate cleaning.
以上就是为大家介绍的有关
新2最新管理手机网址的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务
The above is a detailed introduction to the automatic feeding mixer, and we hope it will be helpful to you. If you have any questions, you are welcome to contact us. We will provide services for you with our attitude