1.全自动上料搅拌车在装车前应检查罐体是否清洁。如果槽内还有其他物料或上次搅拌后留下的物料,应先清洗以确保槽内清洁后再装入新物料。
1. Before loading, the full-automatic loading mixer shall check whether the tank is clean. If there are other materials in the tank or materials left after the last mixing, the tank should be cleaned to ensure that the tank is clean before loading new materials.
2.物料与水或其他液体的装载和混合应按要求进行。自动进料搅拌机可控制物料的用量和水量,严格按照物料配比进行上料和搅拌。和双重检查。
2. Loading and mixing of materials with water or other liquids shall be carried out as required. The automatic feed mixer can control the amount and quantity of materials, and carry out feeding and mixing in strict accordance with the material ratio. And double check.
3.自动给料搅拌机拌料,为了防止材料离析和凝固,所以在输送过程中,搅拌缸应低速旋转(3 ~ 6r/min),商用混凝土搅拌机的重型车辆速度不应超过50km/h。
3. In order to prevent segregation and solidification of materials, the mixing tank shall rotate at a low speed (3 ~ 6R / min) and the speed of heavy vehicles of commercial concrete mixer shall not exceed 50km / h.
4.出料前,搅拌缸应高速旋转30秒,然后反转出料。如罐内混凝土或其他物料有沉淀或坍落度损失,不宜泵送,应调整并高速旋转3分钟后再卸料。
4. Before discharging, the mixing cylinder shall rotate at high speed for 30 seconds, and then reverse discharging. If there is sedimentation or slump loss of concrete or other materials in the tank, it is not suitable to pump them. Adjust them and rotate them at high speed for 3 minutes before discharging.
5.司机不得在路上或现场给车加水,不得无故停车或用餐(尤其是在夜间)。
5. The driver shall not add water to the car on the road or on the site, and shall not stop or eat (especially at night) without reason.
以上是
全自动上料搅拌车厂家小编为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:
The above is the relevant content introduced by the manufacturer of full-automatic charging mixer. If you want to know more, please visit the website: